Where are your tanks made?

Class A Customs is located in Elkhart, Indiana USA, we make all of our tanks here on location, we do not have any other locations and we do not have any distributors.


Can you make me a custom tank?

We can make a custom tank however due to the cost of a mold ($9,000 and over) and needing to buy a larger qty of tanks most customers needing only a few tanks find it better to use a tank we already manufacture. You can fill out our new Water Tank Build to get a quote.



Blank Tanks - no fittings installed in tank - can be done. You will need to verify the lead time on Blank Tanks as we spin the fittings into tanks as soon as made.
If we are currently making a tank we can get you a Blank Tank very quickly, shipping next business day, however, if we are not currently making a tank it can take up-to several weeks to get a tank.
You can call or use the contact us form to ask about lead times on the Blank Tank you are needing.

When ordering a Blank Tank place the tank(s) you are needing in your cart and at check-out in Customer Comments specify what tanks are to be Blank:
Part # of Tank is a BLANK TANK
All Tanks Are BLANK


Can I have the fittings moved or extras added?

We only offer custom fittings on water tanks if ordering a qty of 50+ tanks (single type of tank) per order. Uniseal Fittings allow you to place a fitting in any location on a water tank.

Water Tank Helps Page

Plumbing and Venting Water Tanks


Can I cut a hole in the tank and glue another fitting in?

No, fitting are spun welded into the tank, friction between the fitting and the tank causes both to melt and permanently seal, no additional glues or sealants are used to install the fittings. The residue left by putting the fittings in place is part of the material the tanks and fittings are made from and may spider crack or flake off over time, this in no way harms the tank or causes any usage issues. To add fittings or repair a damaged fitting we now offer Uniseal Fittings which allow you to put a fitting in any location, sizes range from .5" - 3"



How do I get the large fitting out? Are these punch out fittings?

Each tank will come with at least one vent hole made during the manufacturing process (this is not the vent hole for when using the tank), a permanently mounted patch is placed over this hole, this is not a fitting and does not unscrew.


Replacement Tanks Other Suppliers

If you are looking for a replacement tank for a unit:

Check with the manufacturer (do an online search as well) to see if they have information

Look at the tank to see a part number – do an online search for this part and your vehicle make/model

You may not be able to find the same tank, especially in older units.

You may not be able to purchase from the tank manufacturer unless you are a builder/dealer.


Water Tank Suppliers that might have a tank that better fits your needs.

www.plastic-mart.com

www.tank-depot.com

www.plasticwatertanks.com

www.watertanks.com

Add Comment

TOP