Class A Customs Acrylic Water Based Adhesive is a technically advanced scientific formula of water base adhesive designed for use as a bonding adhesive for single ply roofing membranes.
Class A Customs Adhesive is a high solids adhesive with a short drying time. It is used in the Recreational Vehicle and Commercial Roofing industries to adhere membranes to decking.
It is ideal for applications where a quick dry time is dictated by production line speed or other variables.
Class A Customs Adhesive does not lose peel value over time, but remains flexible to allow for expansion and contraction of the membrane. When tested side-by-side with competitors RV adhesives, Class A Customs Adhesive was proven to be stronger and keep a better hold on both the rubber roofing, and the materials it was applied to. Water Based Acrylic AdhesiveFast Setting
- dries clear
Bond grows stronger with age but remains flexible to allow for expansion and contraction of various roofing materials. Excellent adhesion to plywood, particleboard, MDF, and most roofing membranes such as EPDM, PVC, TPO, etc...Coverage
160-200 sq ft/gal
Best when applied in air temperatures over 50 deg F (10 deg C)
For glue roller applicators and glue spreaders, can be hand applied by brush.
Apply to one substrate with 10-12 mil coat weight to achieve excellent bond.
To achieve best bond, apply to both substrates with 5-6 mil coat weight and allow to dry, then laminate to membrane and apply pressure with roller to insure 100% contact.Diluent
Water, if required. Use as received.Clean-up
requires only warm water.Store
product in a cool, dry area.
Product should not be stored in direct sunlight.
Product should not be used after freezing.
First Aid Procedures
Eye contact If product contacts eye, flush with water for at least 15 minutes and seek medical attention immediately.
Skin contact If product contacts skin, wash affected area with soap and water. Seek medical attention if irritation develops or persists. Launder contaminated clothing before reuse.
Inhalation Move subject to fresh air in case of accidental inhalation of vapors or decomposition products. If symptoms persist, get medical attention promptly.