Waste Water Tank Used for Human Waste or Gray Water - DO NOT use for fresh or drinking water
Non-pressurized Tank all tanks we carry must be vented (allow air in/out during use), Plumbing Example
Waste Or Gray Water Use great for rvs, food vendors, tiny houses, overlanding and extra waste water storage
Seamless One-piece seamless construction, no seams to burst Average tank thickness: .219 or 7/32" thick (just under 1/4")
Resistant Stain, Corrosion and Rust Resistant
Color Black in color so tank is easily identified as a waste tank
Non-pressurized Tank all tanks we carry must be vented (allow air in/out during use), Plumbing Example
Waste Or Gray Water Use great for rvs, food vendors, tiny houses, overlanding and extra waste water storage
Seamless One-piece seamless construction, no seams to burst Average tank thickness: .219 or 7/32" thick (just under 1/4")
Resistant Stain, Corrosion and Rust Resistant
Color Black in color so tank is easily identified as a waste tank
Made With Recycled Medium Density Polyethylene (MDPE) Resin - glues do not stick to this material and easily cleaned. - Because product is recycled and intended for waste use it is not tested for safety of drinking or gardening water supply.
Installed Outlet Options
3” ABS Female Pipe - outlet can not be moved
1.5" ABS Female Pipe - outlet can not be moved - Due to the smaller outlet this tank is for dirty water from shower, handwashing, dish-washing - DO NOT use for human wasteFrom the ABS outlet that is installed in the tank run PVC Pipe or
ABS Pipe to the outside of the trailer, a dump valve is added to the
piping.
Pipe is connected to the ABS installed
fitting in the tank with glue. You do not need to tighten the clamp that
is on the ABS Fitting, this is used when the ABS fitting is installed
into the tank and does not help secure your piping, over-tightening this
clamp will damage ABS fitting and tankInlet & Vent
Class A Customs Waste Water Tanks only come with the ABS outlet installed, the end user will determine where the inlet and vent will need to be placed and install.
Class A Customs Waste Water Tanks only come with the ABS outlet installed, the end user will determine where the inlet and vent will need to be placed and install.
Grommets
are not food safe so can only be used for Gray or Waste Water use they
are available in sizes 1.5" and 3", no adhesives are needed for use.
Uniseal Fittings
are food safe and can be used for Fresh, Gray, or Waste Water use, they
are available in size .5" to 3", no adhesives are needed for use.
Use correct size hole saw bit in order to drill a hole in the tank, smooth tank edges, and place Grommet or Uniseal in hole. Piping is then placed into fitting with no glues or adhesives necessary.
Overall Tank Measurements - See Photos
38" x 20.5" x 6.75" (at largest point - see CAD Drawing)Accessories
$21.99
In Stock.
Free Shipping - View Shipping Method Tab Below
$35.99
In Stock.
Free Shipping - View Shipping Method Tab Below
$12.99
In Stock.
Free Shipping - View Shipping Method Tab Below
$9.95
In Stock.
Free Shipping - View Shipping Method Tab Below
$11.99
In Stock.
Free Shipping - View Shipping Method Tab Below