WFCO Artis Water Pump Model # PDS1-130-1240E
12 volt ONLY 110/115/220 volt such as in a house or generator will damage the unit
NSF Approved Materials
4.0 Amp Draw @ 10 PSI
7.0 Amp Draw @ 30 PSI
Open Flow 3.0 GPM
Shut Off 40 PSI
Dry Running - Pump able to run dry without damage
Corrosion Resistant Materials
Self-priming to 6 feet suction
Pump is for fresh water only.
Includes a WFOC 30 mesh Strainer
Pump can be mounted horizontally or vertically (mount pump head down). Do NOT over-tighten screws.
Pump should be on a dedicated (individual) circuit protected by the specified fuse on indicated on the motor label.
Use 14-gauage standard wire up-to 20 feet or 12-gauge up to 50 feet from power source.
Use a 10-15 amp rated on/off switch on the positive red motor lead wire.
Motor Permanent Magnet, totally sealed, enclosed ball bearing and thermal protection.
Water Lines should be 1/2" I.D. (13mm) Flexible hose (preferably braided or reinforced) for main lines
CAUTION: Pump surface will get hot to the touch if operated for extended periods of time under pressurized conditions. Pump will shut off to cool down.