WASTE TANK 28 Gallon Black Water Holding Tank

CLASS A CUSTOMS BLACK TANK Used for Human Waste or Gray Water - DO NOT USE FOR FRESH/DRINKING WATER

RESISTANT Stain, Corrosion and Rust Resistant

OUTLET
3” PVC Female Pipe - outlet can not be moved

Do Not over-tighten fittings damage will occur

From the outlet run PVC piping to the outside of the trailer, a dump valve is added to the piping not to the tank.

INLET & VENT INSTALLATION
Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install.

Grommet or Uniseal will secure inlet/vent pipe with no adhesives needed. Use correct size hole saw bit in order to drill a hole in the tank and place Grommet or Uniseal in hole, piping is then placed in fitting with no glues or adhesives necessary.

Included are a few short videos displaying the grommet installation process.

MOUNTING & BRACING
Brace tank to prevent tank from moving during transit
Do Not hang by ratchet strap, this is too thin and will not adequately support tank.
Do Not place weight on tank, if you need to stack the tanks you will need a weight bearing shelf between them.
Due to the variety of installations we do not carry brackets or bracing systems.