Shopping Bag

0 item(s) in cart/ total: $0    view cart
Sure-flex PVC Roofing Kit
10 - 25 Foot Kits

Sure-flex PVC Roofing Kit

review
0
0
5
Your Price: $189.00
Back Order.
Free Shipping.
Part Number:PVC-KIT

Choose Options

Kit Length
10 Foot Long
15 Foot Long [+$20.00]
20 Foot Long [+$80.00]
25 Foot Long [+$150.00]
30 Foot Long [+$210.00]
35 Foot Long [+$270.00]
40 Foot Long [+$300.00]
45 Foot Long [+$340.00]

You Choose Length Feet x 9 ½” Feet Sure-Flex Roofing Membrane - Folded


Kits from 10 Foot Long - 25 Foot Long Membrane and Adhesives Ship in One Box - FedEx Ground

4 Tubes of Alpha Systems 1021 Self Leveling Sealant (11 oz)

2 Rolls of Putty Tape (1/8" Thick x 3/4" W x 30' L)

1 Gallon of Alpha Systems Rubber Roof Adhesive (8010)



Kits from 30 Foot Long - 45 Foot Long Membrane and Adhesives Ship in Separate Boxes - FedEx Ground

5 Tubes of Alpha Systems 1021 Self Leveling Sealant (11 oz)

4 Rolls of Putty Tape (1/8" Thick x 3/4" W x 30' L)

2 Gallon of Alpha Systems Rubber Roof Adhesive (8010)




Features & Specifications Sure-Flex Roofing Membrane

This is the newest Technology in RV roofing. It’s high level of flexibility, strength, durability and resistance to UV rays, as well as chemicals, make it a natural choice for RV roofs. PVC roofing systems not only reflect sunlight and solar energy, but they extend the useful life of the roof while helping to keep interiors cooler. This membrane meets the high standards for RV roofing. Unlike stationary buildings, RV membranes must withstand extreme environments including subtle flexing and torsion of the chassis or frame during travel. This product passed all the tests with flying colors. It has enough flexibility to work well in most any RV installation.


PVC roofing is a more superior product than TPO and EPDM.


Features & Specifications Alpha Systems 8010 Adhesive

8010 is a technically advanced scientific formula of water base adhesive designed for use as a bonding adhesive for single ply roofing membranes.

DESIGNED TO BOND EPDM, PVC, and Hypalon to wood fiberboard, plywood, EPS, any typical polyisocyanurate insulation, gypsum, concrete, etc.

8010 may be applied by spray, roll coating, or by brush.

Grows stronger and adheres more with age.

Remains flexible to compensate for expansion and contraction of the membrane itself.

COLOR White

SOLVENT Water Based

ADHESIVE TYPE Modified Acrylic

COVERAGE 160-200 sq ft/gal (1side @ 8-10 mil)

NET WEIGHT 8.50 lbs/gal

SOLIDS CONTENT 68%

VISCOSITY 10,000-15,000 cps (Brookfield RVF)

8010 may be applied by spray, roll coating, or by brush.

(When using spray application an Aro 650095 4.25 inch air motor with a 30:1 ratio pump @ 80 psi using a 651-500 gun equipped with #651551 quick clean and spray tip #T.C. 1565 with 0.015 orifice or similar equipment is recommended).

For maximum bond strength a two-sided application is recommended.

If one surface is porous, such as plywood or fiberboard, it is acceptable to wet laminate the membrane to the substrate.

If both surfaces are non-porous, such as EPS or ISO apply the adhesive to both surfaces 4 - 5 mils and allow to dry approximately 20 - 30 minutes, depending on conditions.

Adhesive will turn from white to clear when it is dry.

Apply membrane to roof deck and roll or broom down sheet to assure 100% contact area.

DO NOT FREEZE - KEEP OUT OF REACH OF CHILDREN


Features & Specifications Putty Tape

Non-hardening, pliable putty tape.

COLOR Gray

Waterproofs overlapping metal seams.

1/8" high X 3/4" wide - Roll 30 feet long


Features & Specifications Alpha Systems 1021 Self Leveling Sealant

1021 HIGH SOLIDS SEALANT is a one part all weather self-leveling sealant designed and formulated to provide excellent weather resistance.

It features high solids, low V.O.C. content, and no hazardous air pollutants (HAP).

This compound provides good adhesion to a variety of substrates.

This product has good low temperature resistance and will not crack at -40oF.

Typically used in RV applications where a long-term weather tight seal with good ozone and UV resistance are required.

Cured sealant is paintable.

Surfaces should be free of dirt, oil, or other contaminants. A solvent cleaned surface is optimum.

BASE EPDM

SOLVENT   Heptane

VISCOSITY  80,000 - 200,000 cps

COVERAGE  380 lineal ft/gal

COLOR White

MINIMUM APPLICATION TEMP 60°F

CAUTION:  THIS MATERIAL MAY BE HARMFUL OR FATAL IF SWALLOWED.  IF SWALLOWED, DO NOT INDUCE VOMITING. CALL A PHYSICIAN.  THIS MATERIAL IN THE LIQUID OR VAPOR PHASES IS EXTREMELY FLAMMABLE. KEEP AWAY FROM SPARKS OR OPEN FLAME.  DON'T SMOKE. Prolonged breathing of vapors may cause headaches and even unconsciousness. Avoid prolonged breathing and use good ventilation.

Related Items