Gravity Fill Dish Plastic
Lockable w/ 1 Key
Direct OEM replacement
UV and impact resistant
Resistant to road salts and acids
Paintable
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 4 ?” h x 3 ?” w
Outside Plate 6 ¼” h x 5” w Collar Depth 1” Total Depth 2 ¾”
Smooth Metal or Fiberglass - Exterior Sidewall
Check cutout opening for sufficient clearance.
Proper framing and support is recommended.
Secure product into opening using correct screws (recommended #6 or #8 pan head).
When using gaskets or sealants behind product, keep uniform thickness around perimeter.
Do not install product on material joints!
Crimped Metal Exterior Sidewall (uneven sidewall material)
Check cutout opening for sufficient clearance.
Proper framing and support is recommended.
Secure product into opening using correct screws (recommended #6 or #8 pan head).
Flatten the sidewall raised surface around cutout location.
When using gaskets or sealants behind product, keep uniform thickness around perimeter.
Do not install product on material joints!
CAUTION - Do Not Over-tighten screws during installation
Over-tightening will cause distortion and will not allow product to function properly
