Gravity Fill allows the filling of your non-pressurized Fresh Water Holding Tank
Air Vent Connection to allow air in/out during use on non-pressurized Fresh Water Holding Tank
City Fill allows you to bypass your water tank and hook a pressurized water source directly to your water heater or faucet.
City Fill includes a Lead-Free Brass Check Valve with ½” MPT and Inline Screen
Direct OEM replacement
UV and Impact Resistant
Resistant to road salts and acids
Paintable
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 3 ¾” H x 6” W
Outside Plate 5 5/16” H x 7 9/16" W Total Depth 2 ½”
CAUTION Do Not Over-tighten fittings during installation
Smooth Metal or Fiberglass - Exterior Sidewall
Check cutout opening for sufficient clearance.
Proper framing and support is recommended.
Secure product into opening using correct screws (recommended #6 or #8 pan head).
When using gaskets or sealants behind product, keep uniform thickness around perimeter.
Do not install product on material joints!
Crimped Metal Exterior Sidewall (uneven sidewall material)
Check cutout opening for sufficient clearance.
Proper framing and support is recommended.
Secure product into opening using correct screws (recommended #6 or #8 pan head).
Flatten the sidewall raised surface around cutout location.
When using gaskets or sealants behind product, keep uniform thickness around perimeter.
Do not install product on material joints!
CAUTION Do Not Over-tighten screws during installation
Over-tightening will cause distortion and will not allow product to function properly
