Heavy-duty welded steel construction
Powder Coated to Resist Rust
One Crank Bar per Pack - 4 Pack only gets one bar.
Crank Handle Made of Hardened Steel Zinc Plated
Do Not use an impact to raise or lower any of the jacks we sell it will damage the item.
NO Mounting Hardware, you will need to provide bolts or weld these to your frame.
Total Length 24" including drive shaft
Collapsed Jack Hangs down 2 3/4"
Extended Jack Height 19 1/2"
Width of Jack 2"
Ground Plate 2 3/4" x 4 3/4"
INSTALLATION
No instruction booklet
No Mounting Hardware
May be mounted to frame in front or rear by either weld-on or bolt-on.
WARNINGS
Do Not screw these down, screws will work their way loose or be pulled out.
Do Not use an impact to raise or lower any of the jacks we sell it will damage the item.
Do Not use the scissors jack to lift excessive weight or tires off the ground. Jack is made to stabilize your unit, not lift unit off the ground. Vehicle frame and door jamb damage may result.
Do Not use these scissors jack as a tire changing jack.