Membrane Ships Folded Depending on size of kit you will get one or two boxes (glue / membrane)
Membrane Length / Width It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough.
Local Pick-up Only can specify to have membrane rolled and not boxed, note this in the comment section during checkout.
Installation Help and Manufacturer Warranty on Membrane
Kits 5 Foot Long Membrane and Adhesives
Membrane 9.5 foot wide x length selected
2 Tubes of Class A Customs Self-leveling Silicone Caulk (10.1 fl oz Tube - Color: White)
2 Rolls of Putty Tape (1/8" Thick x 3/4" W x 30' L)
1 Gallon of Class A Customs Acrylic Water Based Adhesive
Kits from 10 Foot Long - 25 Foot Long Membrane and Adhesives - Free Shipping method FedEx Home or Ground Delivery
Membrane 9.5 foot wide x length selected
4 Tubes of Class A Customs Self-leveling Silicone Caulk (10.1 fl oz Tube - Color: White)
2 Rolls of Putty Tape (1/8" Thick x 3/4" W x 30' L)
1 Gallon of Class A Customs Acrylic Water Based Adhesive
Kits from 30 Foot Long - 45 Foot Long Membrane and Adhesives - Free Shipping method FedEx Home or Ground Delivery
Membrane 9.5 foot wide x length selected
5 Tubes of Class A Customs Self-leveling Silicone Caulk (10.1 fl oz Tube - Color: White)
4 Rolls of Putty Tape (1/8" Thick x 3/4" W x 30' L)
2 Gallon of Class A Customs Acrylic Water Based Adhesive
PVC Membrane
This is the newest Technology in RV roofing. It’s high level of strength, durability and resistance to UV rays, as well as chemicals, make it a natural choice for RV roofs.
PVC roofing systems not only reflect sunlight and solar energy, but they extend the useful life of the roof while helping to keep interiors cooler.
This membrane meets the high standards for RV roofing. Unlike stationary buildings, RV membranes must withstand extreme environments including subtle flexing and torsion of the chassis or frame during travel.
This product passed all the tests with flying colors. It has enough flexibility to work well in most any RV installation.
COLOR White
Class A Customs Acrylic Water Based Adhesive
Water base adhesive designed for use as a bonding adhesive for single ply roofing membranes.
Designed to Bond EPDM, PVC, and Hypalon to wood fiberboard, plywood, etc. (not designed for fiberglass)
May be applied by spray, roll coating, or by brush.
Grows stronger and adheres more with age.
Remains flexible to compensate for expansion and contraction of the membrane itself.
COLOR White
COVERAGE 160-200 sq ft/gal (1side @ 8-10 mil)
May be applied by spray, roll coating, or by brush.
(When using spray application an Aro 650095 4.25 inch air motor with a 30:1 ratio pump @ 80 psi using a 651-500 gun equipped with #651551 quick clean and spray tip #T.C. 1565 with 0.015 orifice or similar equipment is recommended).
For maximum bond strength a two-sided application is recommended.
If one surface is porous, such as plywood or fiberboard, it is acceptable to wet laminate the membrane to the substrate.
If both surfaces are non-porous, such as EPS or ISO apply the adhesive to both surfaces 4 - 5 mils and allow to dry approximately 20 - 30 minutes, depending on conditions.
Adhesive will turn from white to clear when it is dry.
Apply membrane to roof deck and roll or broom down sheet to assure 100% contact area.
DO NOT FREEZE - KEEP OUT OF REACH OF CHILDREN
Safety Data Sheet
Butyl Tape
Non-hardening, pliable butyl tape.
Color Off-White
Waterproofs overlapping metal seams.
1/8" high X 3/4" wide - Roll 30 feet long
Safety Data Sheet
Class A Customs Self-Leveling Silicone Caulk (Color White 10.1 fl oz Tube)
All weather self-leveling sealant designed and formulated to provide excellent weather resistance.
It features high solids, low V.O.C. content, and no hazardous air pollutants (HAP).
This compound provides good adhesion to a variety of substrates.
This product has good low temperature resistance and will not crack at -40oF.
Typically used in RV applications where a long-term weather tight seal with good ozone and UV resistance are required.
Cured sealant is paintable.
Surfaces should be free of dirt, oil, or other contaminants. A solvent cleaned surface is optimum.
Safety Data Sheet
PRECAUTION ON ALL PRODUCTS
This material in the liquid or vapor phases is extremely flammable. Keep away from sparks and open flame - do not smoke by this product.
Avoid prolonged breathing of vapors of this product - use in a well ventilated area. Prolonged breathing of vapors may cause headaches and even unconsciousness.
Direct contact of uncured sealant irritates eyes and may irritate skin. In case of eye contact flush eyes with water for 15 minutes and call a physician. In case of skin contact, thoroughly wash skin with soap and water.
Material may be harmful or fatal if swallowed. If swallowed, do not induce vomiting. Seek medical attention immediately.
Warning: Cancer and reproductive harm. www.P65Warnings.ca.gov.
Related Items
