MADE IN USA Class A Customs manufactures these tanks and is located in Elkhart, Indiana
FRESH / DRINKING WATER SAFE great for rvs, food vendors and extra water storageBPA FREE
Class A Customs does not carry this chemical nor uses it in the manufacturing processNSF CERTIFIED MATERIALS
Tank & fittings made from DOW NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin
U.S. FDA 21 CFR 177.1520 (c)3.1a
Canadian HPFB No Objection
Underwriters Laboratories Inc.
NSF International NSF/ANSI Std 61 (sec 4 & 5)NON-PRESSURIZED TANK
all tanks we carry must be vented, Plumbing ExampleFRESH OR GRAY WATER USE
ideal for rvs, food vendors and extra water storage
SEAMLESS One-piece seamless construction, no seams to burst
ROTATABLE tank can be placed on any sideRESISTANT
Stain, Corrosion and Rust ResistantCOLOR
Creamy White in color so you can see waterline through tankMADE FROM
Medium Density Polyethylene (MDPE) Resin - glues do not stick to this material and easily cleaned.OEM PART
No retail box - no install instructions
Have a certified technician install all parts to prevent product damage and personal injury
Helpful information & answers to common questions can be found on the Water Tank Helps PageFOOD VENDORSYou
must verify requirements with health department where inspection will be made before purchasing
Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.
Tanks Do Not
have the NSF logo in them due to NSF fee changes, paperwork on NSF material provided.PREPARATIONSanitize
each tank prior to use to remove any debris from the manufacturing process
Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffsINSTALLATION & PLUMBING
Non-Pressurized Tank all tanks we carry must be vented allowing air in and out when in use, Plumbing ExampleDo Not
hook a garden hose directly to tank damage will occur, it is recommended to use a fill dish or other gravity process
Do Not over-tighten fittings as damage will occur.
It is recommended to use plastic NPT male fittings with plastic female NPT fittings to avoid damaging the threads, metal thread fittings can crush the plastic threads.
Very little, if any, pipe thread tape is needed using too much pipe tape will damage the threads. We do not recommend pipe dope as you can not remove the fitting later, if used be sure to use a food safe brand.
We carry fill dishes, food grade fill hose and some fittings in Plumbing Category
What plumbing items you will need will vary by application. We are not aware of how to run your plumbing or what items you will need please view our Water Tank Help PageMOUNTING & BRACING
Tank can be placed on any side.
Place tank on level surface and brace to prevent tank from moving during transit.Do Not
hang by ratchet straps, this is too thin and will not adequately support tank.Do Not
place weight on tank, if you need to stack the tanks you will need a weight bearing shelf between them. WARRANTY
Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank.
Using this tank for any purpose other than fresh or gray water storage will void any/all warrantyDo Not
use tanks for sewage or fuelTank Measurements
+/- .25" on each measurement due to manufacturing process
17.5” does not include fittings x 7” x 9.5” (rotate tank to change height or width)
Average thickness 7/32” +/-Installed Fittings
1.5" Female NPT Fitting - fitting is sealed to use remove membrane with razor knifeThree)
.5" Female NPT Fitting - fitting is open