FeaturesFRESH WATER / DRINKING WATER SAFE
BPA FREE – Class A Customs does not carry this chemical nor uses it in the manufacturing process
NSF CERTIFIED MATERIAL
NSF Logo Molded into tank
Tank & fittings made from NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin
UV-8 stabilization
Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a
Paperwork can be found on the FAQ's & MUST KNOW INFO Page located at top of website.
Tanks made without the correct materials may be hazardous to your health. Be sure you are getting an item made with materials that are safe and approved, look for tanks that have the NSF logo in them and paperwork readily available.
Tanks without the NSF logo will not pass a health inspection.
FOOD VENDORS
You must verify requirements with health department where inspection will be made before purchasing.
Verify Requirements on Fresh Water Tank, Gray Water Tank (must be larger than fresh), fittings, drainage, and mounting placement.
Example Questions can be found on the FAQ's & MUST KNOW INFO Page located at top of website.
NON-PRESSURIZED TANK all tanks we carry must be vented, Plumbing Example Page
FRESH OR GRAY WATER USE ideal for food vendors and extra water storage
SEAMLESS One-piece seamless construction, no seams to burst
RESISTANT Stain, Corrosion and Rust Resistant
COLOR Creamy White in color so you can see waterline through tank
Specifications
OEM PART No retail box - no install instructions
Have a certified technician install all parts to prevent product damage and personal injury
Helpful Information & Answers to Common Questions can be found on the FAQ's & MUST KNOW INFO Page located at top of website.
Ships FedEx Ground
PREPARATION
Sanitize each tank prior to use to remove any debris from the manufacturing process
Tanks are made in a warehouse wipe with a damp cloth to remove surface dust or scuffs
INSTALLATION & PLUMBING
Non-Pressurized Tank must be vented allowing air in and out when in use, Plumbing Example Page
Do Not hook garden hose directly to tank damage will occur
Do Not over-tighten fitting damage will occur
We carry fill dishes, food grade fill hose and some fittings in Plumbing Category
What plumbing items you will need will vary by application. We are not aware of how to run your plumbing or what items you will need please view our Plumbing Example Page for examples only
MOUNTING & BRACING
Place tank on level surface and brace to prevent tank from moving during transit
Tank needs to be adequately supported, you can find examples on the FAQ's & MUST KNOW INFO Page located at top of the website.
Do Not hang by ratchet strap, this is too thin and will not adequately support tank.
Do Not place weight on tank, if you need to stack the tanks you will need a weight bearing shelf between them.
WARRANTY
Cutting or modifying the tank in any way voids any/all warranty
Using this tank for any purpose other than fresh or gray water storage will void any/all warranty
Do Not use tanks for sewage or fuel
Measurements (+/- .25" on each measurement)
36” Longest Length (not including fittings) x 12” x 17 ¾” (rotate tank to change height or width)
Average thickness 7/32” +/-
Fittings See Photos
Two) 1 ½” Dia screw in balloon fittings (threaded female - NPT Standard) fitting will be closed, to use remove inner membrane with razor knife
Two) ½” Dia screw in fittings (threaded female - NPT Standard)
